IR Touch Payment Terminal Board, WF-SPT-05

TL;DR: IR Touch Payment Terminal Board

AndroidSBC OEM partnership announcement extending smart payment terminal board availability serving international market, United States. The WF-SPT-05 smart payment terminal Android motherboard covers the dual-screen smart payment terminal build for chain checkout and eleven sister configurations in the WF-SPT series, spanning the RK3576 quad-core ARM Cortex-A72 2.2GHz plus quad-core ARM Cortex-A53 1.8GHz SoC with the ARM Mali-G52 MC3 GPU, 8-inch 1280x800 eDP main panel plus 4-inch customer screen, and Android 14 with AOSP baseline and optional GMS firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-SPT family from the Longgang source factory in Shenzhen to international market and United States importers who build countertop payment terminals, self-service kiosks, unattended vending and locker machines, transit ticketing gates and outdoor charging pillars.

About AndroidSBC and the Smart Payment Terminal Android Motherboard Family

AndroidSBC builds smart payment terminal Android motherboards for the unattended and attended ends of the same market. A international market buyer can take a countertop configuration for a shop counter and an outdoor configuration for a charging pillar from one supplier, on one Android baseline, with one SDK. The United States partner gets the compliance file with the first lot - not after the first complaint - because the certification paperwork, the test report and the firmware signing keys are prepared alongside the production order for international market.

WF-SPT-05 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-SPT-05 (dual-screen smart payment terminal build for chain checkout) holds the touch panel, the thermal printer, the reader and the scan engine together while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For United States importers sourcing the WF-SPT family, the WF-SPT-05-A variant is the typical configuration for the hypermarket and supermarket chain checkout lanes use case, in a payment terminal footprint with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Payment Terminal Android Motherboards for United States Buyers

United States integrators are usually carrying an installed estate when they come to AndroidSBC. The new board has to live next to older terminals, older peripherals and older middleware, which puts the serial port, the RS485 lane and the legacy boot path back on the specification sheet.

The practical answer for international market buyers is to buy from a source factory that treats documentation as part of the product: FCC Part 15 and FCC ID for radio modules, plus UL or ETL safety listing reports, FCC / UL conformity, the compliance set for United States and a fixed bill of materials, all shipped with the first lot. AndroidSBC quotes 55900 boards against a published price list, holds the configuration for the length of the agreement, and ships on the Los Angeles - Shanghai lane with the test report and the signed firmware image in the same carton for international market.

Competitive Comparison: WF-SPT-05 vs Competing Smart Payment Terminal Motherboards

For international market buyers the honest comparison is total cost of integration, not unit price. A cheaper board without a printer profile, a scan mapping or an OTA path costs more by the time the estate is live in United States.

• vs consumer tablet boards: the WF-SPT family carries a printer control header, a reader antenna reference design and a scan engine UART mapping, none of which exist on a tablet derivative board.
• vs single-configuration boards: twelve configurations share one peripheral contract, so a international market buyer can move from a countertop lane to an unattended kiosk without re-qualifying the printer or the reader.
• vs boards without a firmware plan: signed images, staged OTA groups with rollback and a published maintenance window come standard, where competing boards ship an image and leave the United States integrator to manage it.
• vs re-spun designs: the bill of materials is frozen per production lot for the length of the agreement, so the board that passed qualification in international market is the board that ships in volume.

Global Cashless Payment, Smart Terminal and Self-Service Checkout Market Trends

The dual-screen smart payment terminal build for chain checkout is being pulled into programmes that did not exist five years ago - EV charging, parcel lockers, stadium ticketing, self-checkout - and each one arrives in United States with its own certification calendar and its own international market install window.

• Countertop tier: WF-SPT-01 covers contactless, IC card, QR and receipt printing in one board, which is the configuration most staffed lanes standardise on.
• Unattended tier: WF-SPT-03 pairs the modem with the printer header and the watchdog for vending, lockers and kiosks where nobody is there to reboot the terminal.
• Flagship tier: WF-SPT-05 adds the larger memory and storage bundle, the customer-facing screen option and the wider temperature window that outdoor and high-throughput formats require.

For international market the practical conclusion is that a terminal programme is a documentation programme. Growth is available to anyone; margin is available to the integrator whose board supplier ships the file with the pallet in United States.

WF-SPT-05 Application Scenarios

The WF-SPT-05 dual-screen smart payment terminal build for chain checkout sits inside a twelve-configuration WF-SPT Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-SPT-05-A configuration is the typical build for the hypermarket and supermarket chain checkout lanes use case, with printer current profile, scan engine mapping and staged OTA management bundled.

• Convenience and grocery counters: the WF-SPT-07 takes contactless, IC card and QR at the till and prints the receipt in one pass.
• Restaurant and quick-service counters: the WF-SPT-05 runs order entry, payment and kitchen ticket printing on the same board.
• Unattended vending and lockers: the WF-SPT-03 pairs the modem with the printer header and the watchdog for sites with no staff present.
• EV charging and fuel forecourts: the WF-SPT-09 holds the wide input range and the sunlight readable panel through a full outdoor season.
• Transit gates and event entry: the WF-SPT-09 takes contactless payment and prints the entry ticket without a fixed counter.
• Self-checkout lanes: one board drives the main panel, the scanner and the receipt printer, with the customer screen option where the format needs it.
• Hotel and resort reception: card pre-authorisation, signature capture and folio printing on a board that also runs the restaurant terminal.
• Hospital and clinic payment desks: card, QR and insurance capture on a locked-down build with staged OTA and an audit trail.
• Government and municipal counters: tax, permit and fee payment on a configuration held for the length of the agreement.

Partnership Models for international market Buyers

These are the three structures that United States partners actually sign, with the engineering scope and the documentation set attached to each one.

• Distribution track: the partner buys the WF-SPT board against a published price list, keeps its own stock, and AndroidSBC supplies the printer profile, the scan mapping and the compliance documents with each lot.
• Integration track: the partner takes the board plus firmware customisation, receipt and language localisation and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-SPT board ships under the partner brand with customised boot logo, packaging, enclosure and documentation, on a fixed bill of materials held for the length of the agreement.

For international market the practical outcome is that the commercial model is negotiable while the technical baseline is not, which keeps a United States estate serviceable through growth.

Frequently Asked Questions

Does the smart payment terminal board family support a dual-screen payment terminal build for chain checkout?

Answer: Yes. AndroidSBC holds the dual-screen payment terminal build for chain checkout as a production configuration with a published price, a sample lead time of 1-3 days for international market and a compliance file matched to the parts on the pallet.

Which configurations are available in the WF-SPT family for United States buyers?

Answer: Buyers in United States can specify RK3576 or any of the eleven sister configurations without re-qualifying the printer, the reader or the scan engine, because the peripheral contract is common to the family.

Can one smart payment terminal board drive a touch panel, a thermal printer and a scan engine at once?

Answer: Yes. A single WF-SPT board handles all three peripherals, and the international market acceptance test is run with the actual printer mechanism and scan engine the project will deploy in United States.

What payment scheme certification support does AndroidSBC provide for United States?

Answer: Scheme certification in United States is handled as documentation work: FCC Part 15 and FCC ID for radio modules, plus UL or ETL safety listing testing, FCC / UL conformity and a signed firmware image, all matched to the configuration code shipped to international market.

What is the minimum order quantity and the sample lead time for United States?

Answer: AndroidSBC publishes the price list by configuration and volume tier, quotes international market sample orders in 1-3 days, and holds production capacity at 5000 boards per week for United States rollouts.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Yes. Firmware customisation covers the ROM, the boot animation, the pre-installed application set and the kiosk lockdown policy, with the signed image delivered alongside the international market production lot.

How are firmware updates delivered to a United States device estate after deployment?

Answer: OTA delivery for United States deployments runs through the AndroidSBC update service or the MDM platform the partner already runs, with signed images and a rollback path held for every release.

What shipping terms does AndroidSBC support for United States orders?

Answer: AndroidSBC ships EXW, FOB Shenzhen, CIF and DAP terms, with Port of Los Angeles as the standard discharge port for United States orders and the compliance file attached to the carton.

Contact AndroidSBC: Start Your WF-SPT-05 Sourcing Conversation

The United States desk at AndroidSBC handles configuration selection, sample dispatch, joint qualification and volume scheduling, and the first call is technical rather than commercial.

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

Wanlin Manufacturing Group, through its AndroidSBC export brand, is the source factory behind the WF-SPT family and is appointing local partners across United States. Volume pricing, private-label terms and joint qualification slots for international market are open now.